CARGO COLD is a thermal separator made of panels that divides the cargo at different temperatures inside a truck, van or semi-trailer, in order to maintain the desired temperature and transport the merchandise in various sectors, giving rise to various environments:

Bi-temperature: refrigerated/dry; cool/dry; frozen/fresh

Tri-temperature: frozen/dry/fresh

Thermal separators are also known as cold mats, separating mats, refrigerated truck mats, cold separators, cargo separators, dividing walls, refrigerator separators, thermal dividers, dividing screens or thermal blankets, among others.

They can be manufactured with a book-type joint or individually.

Optional Add-ons:

Electro fan

Window

reinforced handles

bottom gusset

book type joint

A separator is made up of a rigid core made up of two independent panels that give the separator rigidity and robustness.

In its lower part it is covered with reinforced PVC and incorporates foam rubber in the frame so that it can be better adjusted between the walls and the roof of the vehicle.

In addition, in angles and edges it incorporates reinforcements to protect it from bumps and scratches.

Advantages of Storecargo thermal separators

They favor fuel savings if the vehicle is not fully loaded.

Every time merchandise is unloaded, the truck door is opened, so the cold equipment must start to recover the desired temperature. The larger the truck, the longer it will take to reach optimum temperature. The thermal separators allow spaces to be reduced as the merchandise is unloaded, thus maintaining the appropriate temperature in each section and preserving the cold chain without forcing the cold equipment more than necessary.

It is made to measure to fit perfectly between the walls and roof of the vehicle.

It has a thermal transfer coefficient of K = 0.03, certified by a laboratory, which facilitates one of the lowest insulation on the market.

Its rigid core allows it to continue exerting pressure between the ceiling and walls after many years of use. Does not bend or stand.

It has a plinth in the lower part that contributes to lengthening the useful life of the separator.

They can be customized with inserts (bi-temperature gutter, hooks, wheel arches, etc.), Electric ventilation kit, return window.

* Manufacturing time: from 3 to 5 days *

If you want to buy several units of our thermal separators, or you want more information about it, you can contact us by calling us at +34 695 29 89 87 or write us through our Contact Form and we will offer you the most appropriate solution for your case.